TA Triumph-Adler DCC 2520 - Manual (Page 274)

System Menu
7-26
Activating Auto Sleep
In Auto Sleep mode, the machine automatically switches to Sleep mode if left idle for a preset
period. Enable/disable the use of Auto Sleep mode here. For further details on Sleep mode, refer to
Sleep Mode in Chapter 3 of Operation Guide. The setting items are as follows.
NOTE: If Auto Sleep mode interferes with normal operation, set to disable Auto Sleep mode. Before
disabling Auto Sleep mode, it is first recommended to try extending the time until Auto Sleep mode
is activated (sleep mode change time).
1 Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2 Press [S] or [T] to select Auto sleep and press [Change #].
3 Select [Off] or [On].
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
Activating Auto Clear
Auto Clear automatically releases various specified setting and returns to default settings mode
after a specified period of time since the last device operation. Enable/disable the use of Auto Clear
here. The setting items are as follows.
1 Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2 Press [S] or [T] to select Auto Clear and press [Change #].
3 Select [Off] or [On].
4 Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
Item Description
Off Do not use Auto Sleep mode.
On Use Auto Sleep mode.
Item Description
Off Do not use Auto Clear.
On Use Auto Clear.