TA Triumph-Adler DCC 2520 - Manual (Page 250)

System Menu
7-2
Default Settings
This section explains how to change default settings which are applied when the machine is
powered up or the Reset key is pressed. Automatically configured details set in default setting
mode are called default settings. Default settings are divided between Default Settings for Copying
and Machine Default. These settings may be freely modified to suit your usage patterns.
Default Settings for Copying
Set the following default copy settings.
• Exposure Mode...7-3
• Exposure Steps...7-3
• Original Image Quality...7-4
• Color Mode Setting...7-4
• Setting Auto Color Detection...7-4
• Setting EcoPrint...7-5
• Correct Fine Black Lines...7-5
• Select Paper...7-5
• Setting Auto Paper Selection...7-6
• Paper Type (Auto Color Paper)...7-6
• Paper Type (Auto BW Paper)...7-6
• Selecting Default Cassette...7-7
• Specifying Cassette for Cover Paper...7-7
• Setting Auto % Priority...7-8
• Adjusting Auto Exposure...7-8
• Adjusting Manual Exposure...7-8
• Selecting Default Zoom...7-9
• Selecting Sorting and Offsetting Output...7-9
• Selecting Auto Rotation...7-9
• Setting Margin Defaults...7-10
• Erasing Borders...7-10
• Selecting Maximum Number of Copies...7-10
• Enabling Repeat Copy...7-11
• Showing the Register Key...7-11
• Customize (Basic Screen)...7-11
• Customize (User Choice)...7-12
Accessing the Copy Default screen
Follow the procedures below to access the Copy Default screen.
1 Press the System Menu/Counter key.