Magnum Energy ME-ARC Remote - Manual (Page 8)

© 2014 Magnum Energy, Inc. Page 1
Overview
1.0 Overview
The ME-ARC remote control allows you to monitor and customize the operating parameters for
your Magnum inverter/charger. This remote can be used on all Magnum inverter/charger models
so there is no cross-platform confusion.
The ME-ARC50 comes standard with a 50-foot, 4-conductor (twisted-pair) telephone cable and
includes non-volatile memory (preserves adjustable settings, even if power to the remote or in-
verter is removed).
Info: This manual is for a ME-ARC with software version 4.0 or higher; see the TECH:
02 Versions section on page 36 for information on how to determine your version level.
Menu Buttons Rotary SELECT Knob
LCD
Display
ON/OFF
Pushbuttons
LED
Indicators
Float Charging
DC 13.34V + 0A
The ME-ARC is equipped with the following features:
• LED
Indicators – The at-a-glance LEDs provide the inverter/charger status in a straightforward
way.
• LCD Display – The LCD display is a 16 x 2 line (32 characters total) alphanumeric display
used for setting up the inverter/charger operation, as well as viewing current status or fault
messages.
• ON/OFF Pushbuttons (x2) – The ON/OFF pushbuttons allow the inverter or charger to be
independently and quickly enabled or disabled.
• Menu Buttons (x5) – Allow the inverter or charger to be confi gured to your specifi c system
preferences. These buttons also allow simple access to menu items that can help with
monitoring and troubleshooting your inverter/charger system.
• Rotary SELECT Knob – The rotary encoder knob is similar to a car dash radio knob and is
used to quickly scroll through and select various menu items and settings. Pressing the rotary
knob allows you to select a menu item, or to save a setting once it is displayed on the LCD.
Figure 1-1, Front Panel Features