Magnum Energy ME-ARC Remote - Manual (Page 123)

Page 116 © 2014 Magnum Energy, Inc.
Using a PT Controller: Operation/Monitoring
Figure 10-6, PT Charge Controller METER Menu Map
07H PT Data
Press SELECT
07I Clear PT
Data History
07G Ground Fault
0.00 Amps
P
R R
07F Power to Bat
Press SELECT
Now: 0120.0 W
Life:00900.7 MWH
Reset:1200.0 KWH Press and hold
SELECT button for
5 seconds to reset P
R
P
07I Clear PT
History in x.x
P
Press and hold SELECT
button for 5 seconds
07I Clear PT
HISTORY CLEARED
R
07J PT-100
Version: 1.0
07H PT Data
No Data Recorded
This screen displays if no PT
data is available. If PT data is
available, refer to the PT Data
matrix below.
[Status/Fault]
07 PT Meters
continued….
PT Data
Todays Max Bat
14.7 VDC 2:32P
Todays Harvest
Total 012.0 KWH
Todays Max PV
147 VDC 1:06P
Todays Max Pwr
12.0 KW 2:00P
Day-002 On/Work
Time 12.8 Hrs
Day-002 Max Pwr
14.5 KW 5:18P
Day-002 Max PV
151 VDC 4:38P
Day-002 AH to
Batt 16400 AH
Day-001 Harvest
Total 011.3 KWH
Day-001 On/Work
Time 11.6 Hrs
Day-001 Max Bat
13.5 VDC 11:22A
Day-001 Max PV
136 VDC 10:11A
Day-001 AH to
Batt 14600 AH
Day-002 Harvest
Total 013.8 KWH
Todays Min Bat
11.7 VDC 10:42P
Todays AH to
Batt 12500 AH
Todays On/Work
Time 10.2 Hrs
Navigating the PT Data matrix (example):
Todays Harvest
Total 012.0 KWH Press SELECT, then
rotate SELECT knob
Day-001 Harvest
Total 012.0 KWH
Day-002 Harvest
Total 012.0 KWH
Continue rotating
SELECT knob to
access subsequent
past day data menus
Day-003 Harvest
Total 012.0 KWH
OR
Press SELECT again
and then rotate the
SELECT knob to
access the remaining
data menus for that
particular day
Day-001 Max PV
147 VDC 12:00A
Day-001 Max Bat
14.7 VDC 12:00A
NOTE: Press and hold the SELECT knob for 3
seconds to return to the 07H PT Data main menu
from any screen within the PT Data matrix.
Day-001 Min Bat
12.3 VDC 2:06A
Day-001 Max Pwr
13.1 KW 12:00P
Day-002 Min Bat
14.9 VDC 9:55A
Day-002 Max Bat
16.7 VDC 6:31P