Magnum Energy ME-ARC Remote - Manual (Page 51)

Page 44 © 2014 Magnum Energy, Inc.
Menu Maps
TECH continued….
Read Only display
04 Fault History
Press SELECT
03 Inv Model
[Inverter model#]
06 Ext Control
###
07 Show all
Menus = NO
08 Load Defaults
in #.# seconds 08 Load Defaults
DEFAULTS LOADED
Factory
Defaults
Loaded
06 Ext Control
Press SELECT
06 Ext Control
No Ext Control
Read Only displays
Read Only displays
04A Inv Faults
Press SELECT
[Fault] *
H1 D- 0 HH:MM
Refer to Section 7.2.3.2 (see Figure 7-1)
04B AGS Faults
Press SELECT
04D Clear Faults
Press SELECT
04D Clear Faults
HISTORY CLEARED 04D Clear Faults
in #.# seconds
Press and hold SELECT
button for 5 seconds
LEGEND
Menu Selections
Menu Button
Default/Current
Setting
Change Settings
Menu Heading
Set Search Watts
5 Watts
SETUP
Press SELECT
Rotate SELECT
02A Search Watts
5 Watts
*Specific fault listed; if no fault,
“No Fault History” displays
= current setting*
* For this menu map, the arrow denotes the factory default setting
If “Yes”, only a 3-digit
number displays
Press and hold SELECT
button for 5 seconds
Set SETUP
PIN = 0000 Set SETUP
Unlock SETUP
Lock SETUP
Change PIN
05 SETUP PIN
SETUP Unlocked
P R
R
P
P
P P
R
R
P
P
P
R
= Settings/Range
R
OFF, 5A-60A
08 Load Defaults
Press SELECT
P
R
R
YES
SET Show all
Menus = NO
R
OR
[Status]
VDC ADC
BTS: ###F
Tfmer: ###F
FETs: ###F
04C PT Faults
Press SELECT
Refer to Section 10.2.2.2 (see Figure 10-1)
R
R
R
Note: Refer to Section 3.2.5 for an explan-
ation of displayed data on each screen
Figure 4-5, TECH Button Menu Map