SMA SI 3.0-11 - Manual (Page 95)

SMA Solar Technology AG 13 Directory of the Parameters in Installer Mode and Expert Mode
Operating Manual SI30M-44M-60H-80H-BE-en-30 95
134# Device
135# Slave1
133.02 GnStt Status of the generator
management
Off (1) Deactivated generator operation ✖ ✓
Init (2) Detecting generator
Ready (3) Waiting for request (ready)
Warm (4) Warming up
Connect (5) Connecting
Run (6) Operation
Retry (7) Restarting
Disconnect (8) Split
Cool (9)
Cooling down
Lock (10) Locked after operation
Fail (11) Error
FailLock (12) Locked after error
Reinit (13) Re-detection of the generator
133.03 GnRmgTm Remaining minimum run
time of the generator
in hh:mm:ss
‒ ‒ ✖ ✓
133.04 GnRnStt Status of generator
feedback (expert mode)
Off (1) Off ✖ ✓
On (2) On ✖ ✓
No. Name Description
134.01 ExtPwrAt Active power of external energy source in kW ✖ ✓
134.02 ExtVtg Voltage of external energy source in V ✖ ✓
134.03 ExtCur Current of external energy source in A ✖ ✓
134.04 ExtFrq Frequency of external energy source in Hz ✖ ✓
134.05 ExtPwrRt Reactive power of external energy source in kVAr (expert mode) ✖ ✓
134.07 ExtLkRmgTm Minimum stop time in hh:mm:ss ✖ ✓
No. Name Description
135.01 ExtPwrAtSlv1 Active power of external energy source at slave 1 in kW ✖ ✓
135.02 ExtVtgSlv1 Voltage of external energy source at slave 1 in V ✖ ✓
135.03 ExtCurSlv1 Current of external energy source at slave 1 in A ✖ ✓
135.04 ExtPwrRtSlv1 Reactive power of external energy source at slave 1 in kVAr (expert mode) ✖ ✓
No. Name Description Value (plain
text no.)
Explanation