SMA SI 3.0-11 - Manual (Page 82)

11 Decommissioning SMA Solar Technology AG
82 SI30M-44M-60H-80H-BE-en-30 Operating Manual
11.2 Packaging the Sunny Island
1. Remove the cable glands from the Sunny Island.
2. Pack the Sunny Island and the cable glands. For this, use the original packaging or packaging that is suitable for the
weight and dimensions of the Sunny Island inverter (for the technical data, see the Sunny Island installation manual).
11.3 Disposing of the Sunny Island
• Dispose of the Sunny Island in accordance with the locally applicable disposal regulations for electronic waste.
7. &$87,21
Risk of injury due to the heavy weight of the Sunny Island inverter
• Keep in mind the weight of the Sunny Island inverter.
• With the SI3.0M-11 and SI4.4M-11, remove the Sunny Island
vertically upwards from the wall mounting bracket. To do this,
use the side recess grips. Keep the Sunny Island in a horizontal
position when moving it.
• With the SI6.0H-11 and SI8.0H-11, remove the Sunny Island
vertically upwards from the wall mounting bracket. To do this,
use the side recess grips or a steel rod (diameter: maximum
30 mm). Keep the Sunny Island in a horizontal position when
moving it.