SMA SI 3.0-11 - Manual (Page 23)

SMA Solar Technology AG 5 Operation of the Sunny Island Inverter With the Sunny Remote Control
Operating Manual SI30M-44M-60H-80H-BE-en-30 23
5.2.3 Information Page in Off-Grid Systems
Figure 6: Energy flows and status of the Sunny Island inverter (example)
B Device assignment The Sunny Island connected to the Sunny Remote Control is the
master.
The Sunny Island connected to the Sunny Remote Control is slave 1.
The Sunny Island connected to the Sunny Remote Control is slave 2.
C SD memory card SD memory card inserted.
Symbol
flashing
The Sunny Island is accessing the SD memory card.
No
symbol
SD memory card not inserted.
D Multifunction relay 1 Multifunction relay 1 is deactivated.
Multifunction relay 1 is activated.
E Multifunction relay 2 Multifunction relay 2 is deactivated.
Multifunction relay 2 is activated.
F Battery power and
state of charge
The battery is being charged.
The battery is being discharged.
Battery power in kW, state of charge (SOC) in %
G hh:mm:ss Time System time
H Power and status of
the utility grid
Power in kW
The utility grid voltage and frequency are within the configured limits.
The maximum reverse power in the utility grid has been exceeded.
Position Designation
A
Graphical representation of the energy flows
B Status of the stand-alone grid
C Status of the Sunny Island inverter
D State of charge of the battery
E Status of the generator
Position Symbol Designation Explanation