SMA SI 3.0-11 - Manual (Page 116)

13 Directory of the Parameters in Installer Mode and Expert Mode SMA Solar Technology AG
116 SI30M-44M-60H-80H-BE-en-30 Operating Manual
241.01 Rly1Op Multifunction
relay 1 function
(continued)
ExtPwrDer The Sunny Island controls additional
loads in order to put excess energy to
practical use. When excessive energy
can be used, the multifunction relay is
activated.
✓ ✓ AutoGn
GnRn When the generator is running and
connected, the multifunction relay is
activated.
ExtVfOk When the voltage and frequency of
the external energy source are within
the valid range for the connection, the
multifunction relay is activated.
GdOn When the utility grid is connected, the
multifunction relay is activated.
Error When an error message is pending,
the multifunction relay is deactivated.
Warn When a warning is pending, the
multifunction relay is activated.
Run When the Sunny Island or the cluster
is in operation, the multifunction relay
is activated.
BatFan The Sunny Island controls the battery
room fan. When the battery room is
to be ventilated, the multifunction
relay is activated.
AcdCir The Sunny Island controls the
electrolyte pump of the battery. When
the electrolyte is to be circulated, the
multifunction relay is activated.
MccBatFan The Sunny Island controls the battery
room fan for all clusters together.
When the battery room is to be
ventilated, the multifunction relay is
activated.
MccAutoLod 1-level load shedding
When all batteries have reached the
upper SOC threshold, the
Sunny Island ends load shedding.
When the loads are to be shed, the
multifunction relay is deactivated.
CHPReq No function
CHPAdd No function
No. Name Description Value Explanation Default
value