SMA SI 3.0-11 - Manual (Page 9)

SMA Solar Technology AG 2 Safety
Operating Manual SI30M-44M-60H-80H-BE-en-30 9
2 Safety
2.1 Intended Use
Sunny Island
The Sunny Island is a battery inverter which controls the electrical energy balance in an off-grid system, in a battery
backup system, or in a system for increased self-consumption. In a battery backup system, you can also use the
Sunny Island for increased self-consumption.
Use this product only in accordance with the information provided in the enclosed documentation and with the locally
applicable standards and directives. Any other application may cause personal injury or property damage. Any changes
to the electrical installation must be performed in accordance with the Sunny Island inverter installation manual.
The Sunny Island is not suitable for supplying life-sustaining medical devices. A power outage must not lead to personal
injury.
The Sunny Island uses batteries for the storage of energy. The battery room must be ventilated in accordance with the
requirements of the battery manufacturer and with the locally applicable standards and directives (see documentation of
the battery manufacturer).
Alterations to the product, e.g., modifications or conversions, are permitted only with the express written permission of
SMA Solar Technology AG. Unauthorized alterations will void guarantee and warranty claims and usually void the
operation permit. SMA Solar Technology AG shall not be held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a convenient place for future
reference and observe all instructions contained therein.
The type label must remain permanently attached to the product.
Sunny Remote Control
You can configure and control the system from a central location using the Sunny Remote Control display.
Only use the product in accordance with the information provided in the enclosed documentation. Alterations to the
product, e.g., modifications or conversions, are permitted only with the express written permission of
SMA Solar Technology AG. Unauthorized alterations will void guarantee and warranty claims and usually void the
operation permit. SMA Solar Technology AG shall not be held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a convenient place for future
reference and observe all instructions contained therein.
The type label must remain permanently attached to the product.