SMA SI 3.0-11 - Manual (Page 92)

13 Directory of the Parameters in Installer Mode and Expert Mode SMA Solar Technology AG
92 SI30M-44M-60H-80H-BE-en-30 Operating Manual
114# Slave2
13.1.2 Battery (120#)
No. Name Description Value Explanation
114.01 InvOpSttSlv2 Operating state of slave 2 Init (1) Initialization ✓ ✓
Startup (2) Switch from standby to
operation
Standby (3) Standby
Run (4) Operation
I-Loop (5) Current-controlled generator
operation
Error (6) Error status
114.02 InvPwrAtSlv2 Active power of slave 2 in kW ‒ ‒ ✓ ✓
114.03 InvVtgSlv2 Voltage of slave 2 in V ‒ ‒ ✓ ✓
114.04 InvCurSlv2 Current of slave 2 in A ‒ ‒ ✓ ✓
114.05 InvPwrRtSlv2 Reactive power of slave 2
in kVAr (expert mode)
‒ ‒ ✓ ✓
114.06 Rly1SttSlv2 State of multifunction relay 1 in
slave 2
Off Multifunction relay is
deactivated.
✓ ✓
On Multifunction relay is
activated.
114.07 Rly2SttSlv2 State of multifunction relay 2 in
slave 2
Off Multifunction relay is
deactivated.
✓ ✓
On Multifunction relay is
activated.
114.09 TrfTmpSlv2 Temperature of the transformer
in slave 2 in °C (expert mode)
‒ ‒ ✓ ✓
114.10 HsTmpSlv2 Temperature of the heat sink in
slave 2 in °C (expert mode)
‒ ‒ ✓ ✓
No. Name Description Value (plain
text no.)
Explanation
120.01 BatSoc State of charge of the battery (SOC)
based on the nominal battery capacity
in %
0% to 100% ‒ ✓ ✓
120.02 BatVtg Battery voltage in V ‒ ‒ ✓ ✓
120.03 BatChrgVtg Charging voltage setpoint in V ‒ ‒ ✓ ✓
120.04 AptTmRmg Remaining absorption time upon
completion of the active charging
process 120.05 BatChrgOp
in hh:mm:ss
‒ ‒ ✓ ✓