SMA SI 3.0-11 - Manual (Page 91)

SMA Solar Technology AG 13 Directory of the Parameters in Installer Mode and Expert Mode
Operating Manual SI30M-44M-60H-80H-BE-en-30 91
113# Slave1
112.08 Rly2Stt State of multifunction relay 2 Off Multifunction relay is
deactivated.
✓ ✓
On Multifunction relay is
activated.
112.12 TrfTmp Temperature of the transformer in °C
(expert mode)
The temperature of the transformer is
displayed in the master of a cluster.
‒ ‒ ✓ ✓
112.13 HsTmp Temperature of the heat sink in the
Sunny Island in °C (expert mode)
The temperature of the heat sink is
displayed in the master of a cluster.
‒ ‒ ✓ ✓
No. Name Description Value Explanation
113.01 InvOpSttSlv1 Operating state of slave 1 Init (1) Initialization ✓ ✓
Startup (2) Switch from standby to
operation
Standby (3) Standby
Run (4) Operation
I-Loop (5) Current-controlled generator
operation
Error (6) Error status
113.02 InvPwrAtSlv1 Active power of slave 1 in kW ‒ ‒ ✓ ✓
113.03 InvVtgSlv1 Voltage of slave 1 in V ‒ ‒ ✓ ✓
113.04 InvCurSlv1 Current of slave 1 in A ‒ ‒ ✓ ✓
113.05 InvPwrRtSlv1 Reactive power of slave 1
in kVAr (expert mode)
‒ ‒ ✓ ✓
113.06 Rly1SttSlv1 Status of multifunction relay 1 in
slave 1
Off Multifunction relay is
deactivated.
✓ ✓
On Multifunction relay is
activated.
113.07 Rly2SttSlv1 Status of multifunction relay 2 in
slave 1
Off Multifunction relay is
deactivated.
✓ ✓
On Multifunction relay is
activated.
113.09 TrfTmpSlv1 Temperature of the transformer
in slave 1 in °C (expert mode)
‒ ‒ ✓ ✓
113.10 HsTmpSlv1 Temperature of the heat sink in
slave 1 in °C (expert mode)
‒ ‒ ✓ ✓
No. Name Description Value
(plain text no.)
Explanation