SMA SI 3.0-11 - Manual (Page 124)

13 Directory of the Parameters in Installer Mode and Expert Mode SMA Solar Technology AG
124 SI30M-44M-60H-80H-BE-en-30 Operating Manual
312.11 CardStt SD memory card status
message
Off (1) No SD memory card inserted ✓ ✓
Operational (2) Ready for operation
Mount (3) Initialization
OutOfSpace (4) No storage space available
BadFileSys (5) No file system detected
Incomp (6) File system incompatible
Parameter (7) Parameter set write access
ParamFailed (8) Parameter set write access
failed
WriteLogData (9) Log data write access
312.12 FwVer2 Firmware version of
digital signal processor
‒ ‒ ✓ ✓
312.13 FwVer3 Boot loader of the
operation control unit
‒ ‒ ✓ ✓
312.14 FwVer4 Boot loader of the
digital signal processor
‒ ‒ ✓ ✓
312.18 ComMod1 Type of interface in the
interface slot SISysCan
‒‒‒ No interface inserted ✖ ✓
SI-SysCan SI-SYSCAN.BGx inserted
(multicluster system)
312.19 ComMod2 Type of interface in the
interface slot
SiComSma
‒‒‒ No interface inserted ✓ ✓
SI-ComSma SI-COMSMA.BGx inserted
(RS485)
SI-SW-DM SWDMSI-NR inserted
(Speedwire)
312.21 MmcUpdFmVer OCU firmware version
of the update file on the
SD memory card
− − ✓ ✓
312.22 MmcUpdFmVer2 DSP firmware version of
the update file on the
SD memory card
− − ✓ ✓
312.23 MmcFileSys File system of the SD
memory card
FAT16 − ✓ ✓
FAT32 −
No. Name Description Value
(plain text no.)
Explanation