SMA SI 3.0-11 - Manual (Page 16)

3 Product Description SMA Solar Technology AG
16 SI30M-44M-60H-80H-BE-en-30 Operating Manual
3.3 Type Label
The type label clearly identifies the product. The type label is located on the right-hand side of the enclosure. You will find
the following information on the type label:
• Address of SMA Solar Technology AG
• Device type (Model)
• Serial number (Serial No.)
• Device-specific characteristics
You will require the information on the type label to use the product safely and when seeking customer support from the
SMA Service Line.
Symbols on the type label
Symbol Explanation
Danger to life due to high voltages
The product operates at high voltages. All work on the product must be carried out by qualified
persons only.
Risk of burns due to hot surfaces
The product can get hot during operation. Avoid contact during operation. Allow the product to cool
down sufficiently before carrying out any work. Wear personal protective equipment such as safety
gloves.
Observe the documentation.
Observe all documentation supplied with the product.
AC
Alternating current
DC
Direct current
Transformer
The product has a transformer.
WEEE designation
Do not dispose of the product together with the household waste but in accordance with the locally
applicable disposal regulations for electronic waste.
CE marking
The product complies with the requirements of the applicable EU directives.
Protection class I
All electrical equipment is connected to the grounding conductor system of the product.
Degree of protection
The product is protected against interior dust deposits and splashing water from all angles.
Certified safety
The product is VDE-tested and complies with the requirements of the German Equipment and Product
Safety Act.
RCM tick
The product complies with the requirements of the applicable Australian EMC standards.
V D E