HEIDENHAIN TNC 320 (340 551-01) - Manual (Page 84)

84 4 Programming: Fundamentals of NC, File Management, Programming Aids
4.4 Cr
eating and W
riting Pr
ogr
ams
Find/Replace any text
8 If required, select the block containing the word you wish to find.
8 Select the Search function: The TNC superimposes
the search window and displays the available search
functions in the soft-key row.
8 Activate the Replace function: The TNC superimposes
a window for entering the text to be inserted.
8 Enter the text to be searched for. Please note that the
search is case-sensitive. Then confirm with the ENT
key.
8 Enter the text to be inserted. Please note that the
entry is case-sensitive.
8 Start the search process: The TNC displays the
available search options in the soft-key row (see the
table of search options).
8 If required, change the search options.
8 Start the search process: The TNC moves to the next
occurrence of the text you are searching for.
8 To replace the text and then move to the next
occurrence of the text, press the REPLACE soft key.
To replace all text occurrences, press the REPLACE
soft key. To skip the text and move to its next
occurrence press the FIND soft key.
8 End the search function.
The find/replace function is not possible if
„ a program is protected
„ the program is currently being run by the TNC
When using the REPLACE ALL function, ensure that you
do not accidentally replace text that you do not want to
change. Once replaced, such text cannot be restored.