HEIDENHAIN TNC 320 (340 551-01) - Manual (Page 66)

66 4 Programming: Fundamentals of NC, File Management, Programming Aids
4.3 W
o
rk
ing with the File Manag
e
r
Copying a single file
8 Move the highlight to the file you wish to copy.
8 Press the COPY soft key to select the copy function.
The TNC opens a pop-up window
8 Enter the name of the destination file and confirm your
entry with the ENT key or OK soft key: The TNC
copies the file to the active directory or to the
corresponding destination directory. The original file
is retained
Copying a directory
Move the highlight in the left window onto the directory you want to
copy. Instead of the COPY soft key, press the COPY DIR soft key.
Subdirectories can be copied by the TNC at the same time.
Making a setting in a selection box
In various dialogs, the TNC opens a pop-up window in which you can
make settings in selection boxes.
8 Move the cursor into the desired selection box and press the GOTO
key
8 Use the arrow keys to position the cursor to the required setting
8 With the OK soft key you confirm the value, and with the CANCEL
soft key you discard the selection