beautypg.com

8 optional program-run interruption, Function – HEIDENHAIN TNC 320 (340 551-01) User Manual

Page 394

background image

394

11 Test Run and Program Run

1

1

.8 Optional Pr

ogr

a

m-Run Int

e

rr

uption

11.8 Optional Program-Run

Interruption

Function

The TNC optionally interrupts the program run or test run at blocks
containing M01. If you use M01 in the Program Run mode, the TNC
does not switch off the spindle or coolant.

8

Do not interrupt Program Run or Test Run at blocks

containing M01: Set soft key to OFF.

8

Interrupt Program Run or Test Run at blocks

containing M01: Set soft key to ON.

See also other documents in the category HEIDENHAIN Equipment: