HEIDENHAIN TNC 320 (340 551-01) - Manual (Page 33)

HEIDENHAIN TNC 320 33
1
.4 Stat
us Displa
ys
1.4 Status Displays
“General” status display
The status display 1 informs you of the current state of the machine
tool. It is displayed automatically in the following modes of operation:
„ Program Run, Single Block and Program Run, Full Sequence, except
if the screen layout is set to display graphics only, and
„
Positioning with Manual Data Input (MDI).
In the Manual mode and Electronic Handwheel mode the status
display appears in the large window.
Information in the status display
Symbol Meaning
Actual or nominal coordinates of the current position.
Machine axes; the TNC displays auxiliary axes in
lower-case letters. The sequence and quantity of
displayed axes is determined by the machine tool
builder. Refer to your machine manual for more
information.
Tool number T.
The displayed feed rate in inches corresponds to one
tenth of the effective value. Spindle speed S, feed
rate F and active M functions.
Axis locked.
Override setting in percent
Axis can be moved with the handwheel.
Axes are moving under a basic rotation.
No active program.
Program run started.
Program run stopped.
Program run is being aborted.
1 1
ACTL.
X Y Z
F S M