HEIDENHAIN TNC 320 (340 551-01) - Manual (Page 440)

440 14 Tables and Overviews
14.2 T
e
c
h
nical Inf
o
rm
ation
Touch Probe Cycles „ Calibrating a touch probe
„ Compensation of workpiece misalignment, manual or automatic
„ Datum setting, manual or automatic
„
Automatic workpiece measurement
„ Cycles for automatic tool measurement
Specifications
Components „ Main computer with TNC keyboard and integrated 15.1-inch TFT color flat-panel display
with soft keys
Program memory „ 10 MB (on compact flash memory card CFR)
Input resolution and display
step „ To 0.1 µm for linear axes
„
To 0.0001° for angular axes
Input range „ Maximum 999 999 999 mm or 999 999 999°
Interpolation „ Line in 4 axes
„ Arc in 2 axes
„ Helix: combination of circular and linear motion
Block processing time
3-D straight line without radius
compensation † 6 ms (3-D straight line without radius compensation)
Axis control „ Position loop resolution: Signal period of the position encoder/1024
„ Cycle time of position controller: 3 ms
„ Cycle time of speed controller: 600 µs
Traverse range „ Maximum 100 m
Spindle speed
„
Maximum 100 000 rpm (analog speed command signal)
Error compensation „ Linear and nonlinear axis error, backlash, reversal spikes during circular movements,
thermal expansion
„ Stick-slip friction
Data interfaces
„
One each RS-232-C /V.24 max. 115 kilobaud
„ Expanded data interface with LSV-2 protocol for remote operation of the TNC through
the data interface with the HEIDENHAIN software TNCremo
„ Ethernet interface 100 Base T
approx. 2 to 5 megabaud (depending on file type and network load)
„
2 x USB 1.1
Ambient temperature „ Operation: 0 °C to +45 °C (32 °F to 113 °F)
„
Storage: –30 °C to +70 °C (–22 °F to 158 °F)
User functions