HEIDENHAIN TNC 320 (340 551-01) - Manual (Page 381)

HEIDENHAIN TNC 320 381
1
1
.1 Gr
aphics
Repeating graphic simulation
A part program can be graphically simulated as often as desired, either
with the complete workpiece or with a detail of it.
Function Soft key
Restore workpiece blank to the detail magnification in
which it was last shown.
Reset detail magnification so that the machined
workpiece or workpiece blank is displayed as it was
programmed with BLK FORM.
With the WINDOW BLANK FORM soft key the TNC
returns the graphic of the workpiece blank to its originally
programmed dimensions.