HEIDENHAIN TNC 320 (340 551-01) - Manual (Page 412)

412 12 MOD Functions
12.9 Ether
n
et Int
e
rf
ace
Configuring network access to other devices (mount)
8 Connect the TNC (port X26) with a network or a PC
8 In the file manager (PGM MGT), select the Network soft key.
8 Press the MOD key. Enter the code number NET123.
8 Press the DEFINE NETWORK CONNECTN. soft key.
8 It opens the dialog window for the network configuration
Make sure that the person configuring your TNC is a
network specialist.
The parameters username, workgroup and password do not
need to be entered in all Windows operating systems.
Setting Meaning
Mount device
„
Connection over NFS: Directory name to be
mounted. This is formed from the network
address of the device, a colon, and the name
of the directory. Enter the network address as
four decimal numbers separated by periods
(dotted-decimal notation). Use the correct
capitalization when entering the path.
„ To connect individual Windows computers,
enter the network name and the share name
of the computer, e.g. //PC1791NT/C
Mount point Device name: The device name entered here is
displayed on the control in the program
management for the mounted network, e.g.
WORLD: (The name must end with a colon!)
File system File system type:
„
NFS: Network File System
„ SMB: Windows network
NFS option rsize: Packet size in bytes for data reception
wsize: Packet size for data transmission in
bytes
time0=: Time in tenths of a second, after which
the control repeats an unanswered Remote
Procedure Call.
soft: YES repeats the Remote Procedure Call
until the NFS server answers. If NO is entered, it
is not repeated