HEIDENHAIN TNC 320 (340 551-01) - Manual (Page 70)

70 4 Programming: Fundamentals of NC, File Management, Programming Aids
4.3 W
o
rk
ing with the File Manag
e
r
Data transfer to or from an external data
medium
Call the file manager.
Select the screen layout for data transfer: press the
WINDOW soft key. Select the desired directory in
both halves of the screen. In the left half of the
screen, for example,
1 the TNC shows all files saved
on its hard disk. In the right half of the screen 2 it
shows all files saved on the external data medium.
Use the SHOW FILES and SHOW TREE soft keys to
switch between the folder view and file view.
Use the arrow keys to highlight the file(s) that you want to transfer:
Moves the highlight up and down within a window.
Moves the highlight from the left to the right window,
and vice versa.
If you wish to copy from the TNC to the external data medium, move
the highlight in the left window to the file to be transferred.
To transfer a single file, position the highlight on the desired file.
To transfer several files: Press the TAG soft key (in
the second soft-key row, see “Marking files,” page
68) and mark the corresponding files. With the back
soft key, exit the TAG function again.
You might have to set up the data interface before you
can transfer data to an external data medium (see
“Setting the Data Interfaces” on page 404).
1 2