H3C Technologies H3C S7500E Series Switches - Manual (Page 45)

2-25
To do… Use the command… Remarks
Set the lifetime of the history
records in an NQA test
group
history-record keep-time keep-time
Optional
By default, the history records
in the NQA test group are kept
for 120 minutes.
Configure the maximum
number of history records
that can be saved in a test
group
history-record number number
Optional
By default, the maximum
number of records that can be
saved in a test group is 50
Configuring Optional Parameters Common to an NQA Test Group
Optional parameters common to an NQA test group are valid only for tests in this test group.
Unless otherwise specified, the following parameters are applicable to all test types and they can be
configured according to the actual conditions.
Follow these steps to configure optional parameters common to an NQA test group:
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Enter test type view of a test group
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo | udp-jitter | voice }
—
Configure the descriptive string for
a test group
description text
Optional
By default, no descriptive string is
available for a test group.
Configure the interval between two
consecutive tests for a test group
frequency interval
Optional
By default, the interval between
two consecutive tests for a test
group is 0 milliseconds, that is,
only one test is performed.
If the last test is not completed
when the interval specified by the
frequency command is reached, a
new test is not started.