H3C Technologies H3C S7500E Series Switches - Manual (Page 113)

5-14
z If a PoE profile is applied, it cannot be deleted or modified before you cancel its application.
z The poe max-power max-power and poe priority { critical | high | low } commands must
be configured in only one way, that is, either through command lines or through PoE profile.
z A PoE parameter on a PoE interface must be configured, modified and deleted in only one
way. If a parameter configured in a way (for example, through command lines) is then
configured in the other way (for example, through PoE profile), the latter configuration fails
and the original one is still effective. To make the latter configuration effective, you must
cancel the original one first.
Applying PoE Profile
You can apply a PoE profile in either of the two views: system view and interface view. If you
perform application to a PoE interface in both views, the latter application takes effect. To apply
a PoE profile to multiple PoE interfaces, the system view is more efficient.
Follow these steps to apply the PoE profile in system view:
To do… Use the command… Remarks
Enter system view system-view —
Apply the PoE profile to one or
multiple PoE interfaces
apply poe-profile { index index | name
profile-name } interface
interface-range
Required
Follow these steps to apply the PoE profile in interface view:
To do… Use the command… Remarks
Enter system view system-view —
Enter PoE interface view
interface interface-type
interface-number
—
Apply the PoE profile to the current
PoE interface
apply poe-profile { index index |
name profile-name }
Required