H3C Technologies H3C S7500E Series Switches - Manual (Page 190)

12-8
Outputting System Information to the Console
Outputting system information to the console
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 12-2 for default
channel names.
Configure the channel through
which system information can
be output to the console
info-center console channel
{ channel-number |
channel-name }
Optional
By default, system information is
output to the console through
channel 0 (known as console).
Configure the output rules of
system information
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
Optional
Refer to Default Output Rules of
System Information .
Configure the format of the time
stamp
info-center timestamp
{ debugging | log | trap } { boot
| date | none }
Optional
The time stamp format for log,
trap and debugging information
is date by default.
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the associated
display function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the console:
To do… Use the command… Remarks
Enable the monitoring of system
information on the console
terminal monitor
Optional
Enabled on the console and
disabled on the monitor terminal
by default.
Enable the display of debugging
information on the console
terminal debugging
Required
Disabled by default