H3C Technologies H3C S7500E Series Switches - Manual (Page 43)

2-23
To do… Use the command… Remarks
Configure to send traps to
network management server
under specified conditions
reaction trap { probe-failure
consecutive-probe-failures | test-complete |
test-failure cumulate-probe-failures }
Optional
No traps are sent to
the network
management server by
default.
Only the reaction trap test-complete command is supported in a voice test, namely, in a voice test,
traps are sent to the NMS only if the test succeeds.
Configuring the NQA Statistics Function
NQA puts the NQA tests completed in a specified interval into one group, and calculates the statistics
of the test results of the group. These statistics form a statistics group. To view information of the
statistics group, use the display nqa statistics command. To set the interval for collecting statistics,
use the statistics interval command.
When the number of statistics groups kept reaches the upper limit, if a new statistics group is
generated, the statistics group that is kept for the longest time is deleted. To set the maximum number
of statistics groups that can be kept, use the statistics max-group command.
A statistics group is formed after the last test is completed within the specified interval. A statistics
group has the aging mechanism. A statistics group will be deleted after it is kept for a period of time. To
set the hold time of a statistics group, use the statistics hold-time command.
Follow these steps to configure the NQA statistics function:
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Enter test type view of the test
group
type { dlsw | dns | ftp | http |
icmp-echo | snmp | tcp |
udp-echo | udp-jitter | voice }
—
Configure the interval for collecting
the statistics of the test results
statistics interval interval
Optional
60 minutes by default.