H3C Technologies H3C S7500E Series Switches - Manual (Page 171)

10-2
Configuring Traffic Mirroring
Configuring Traffic Mirroring
Follow these steps to configure traffic mirroring:
To do… Use the command… Remarks
Enter system view system-view —
Create a class and enter the
corresponding class view
traffic classifier classifier-name
[ operator { and | or } ]
Required
By default, the and keyword is
specified. That is, the relation
between the rules in the class
view is logic AND. This operation
leads you to class view.
Configure the match criteria if-match match-criteria Required
Return to system view quit —
Create a traffic behavior and
enter traffic behavior view
traffic behavior behavior-name Required
Configure the traffic mirroring
action for the traffic behavior
mirror-to { cpu | interface
interface-type interface-number }
Required
Return to system view quit —
Create a QoS policy and enter
QoS policy view
qos policy policy-name —
Associate the class with the
traffic behavior
classifier classifier-name behavior
behavior-name
Required
Return to system view quit —
Apply the QoS policy See Applying a QoS Policy —
Applying a QoS Policy
z For details about applying a QoS policy, see QoS Configuration Approaches in the ACL and QoS
Configuration Guide.
z For information about the qos policy configuration commands, see QoS Policy Configuration
Commands in the ACL and QoS Command Reference.