H3C Technologies H3C S7500E Series Switches - Manual (Page 191)

12-9
To do… Use the command… Remarks
Enable the display of log
information on the console
terminal logging
Optional
Enabled by default
Enable the display of trap
information on the console
terminal trapping
Optional
Enabled by default
Outputting System Information to a Monitor Terminal
System information can also be output to a monitor terminal, which is a user terminal that has
login connections through the AUX and VTY user interface.
Outputting system information to a monitor terminal
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 12-2 for default
channel names.
Configure the channel through
which system information can
be output to a monitor terminal
info-center monitor channel
{ channel-number |
channel-name }
Optional
By default, system information is
output to the monitor terminal
through channel 1 (known as
monitor).
Configure the output rules of the
system information
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
Optional
Refer to Default Output Rules of
System Information
Configure the format of the time
stamp
info-center timestamp
{ debugging | log | trap } { boot
| date | none }
Optional
By default, the time stamp
format for log, trap and
debugging information is date.