H3C Technologies H3C S7500E Series Switches - Manual (Page 123)

6-5
To do… Use the command… Remarks
Configure SNMP agent system
information
snmp-agent sys-info { contact
sys-contact | location
sys-location | version { { v1 |
v2c | v3 }* | all } }
Required
The defaults are as follows:
Hangzhou H3C Technologies
Co., Ltd. for contact; Hangzhou
China for location and SNMP v3
for the version.
Configure a local engine ID for
an SNMP entity
snmp-agent local-engineid
engineid
Optional
Company ID and device ID by
default.
Create or update MIB view
content for an SNMP agent
snmp-agent mib-view
{ excluded | included }
view-name oid-tree [ mask
mask-value ]
Optional
The MIB view name is
ViewDefault and OID is 1 by
default.
Configur
e
directly
Create
an
SNMP
commun
ity
snmp-agent community { read
| write } community-name [ acl
acl-number | mib-view
view-name ]*
Configur
e an
SNMP
group
snmp-agent group { v1 | v2c }
group-name [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl acl-number ]
Configur
e SNMP
NMS
access
right
Configur
e
indirectl
y
Add a
user to
an
SNMP
group
snmp-agent usm-user { v1 |
v2c } user-name group-name
[ acl acl-number ]
Use either approach.
Both commands can be used to
configure SNMP NMS access
rights. The second command
was introduced to be compatible
with SNMPv3.
The community name configured
on the NMS should be consistent
with the username configured on
the agent.
Configure the maximum size of
an SNMP packet that can be
received or sent by an SNMP
agent
snmp-agent packet max-size
byte-count
Optional
1,500 bytes by default.