H3C Technologies H3C S7500E Series Switches - Manual (Page 192)

12-10
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to enable the
associated display function in order to display the output information on the monitor terminal.
Follow these steps to enable the display of system information on a monitor terminal:
To do… Use the command… Remarks
Enable the monitoring of system
information on a monitor
terminal
terminal monitor
Required
Enabled on the console and
disabled on the monitor terminal
by default.
Enable the display of debugging
information on a monitor
terminal
terminal debugging
Required
Disabled by default
Enable the display of log
information on a monitor
terminal
terminal logging
Optional
Enabled by default
Enable the display of trap
information on a monitor
terminal
terminal trapping
Optional
Enabled by default
Outputting System Information to a Log Host
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 12-2 for default
channel names.