H3C Technologies H3C S7500E Series Switches - Manual (Page 29)

2-9
Configuration prerequisites
Before performing a DNS test, configure the mapping between a domain name and an IP address on
a DNS server.
Configuring a DNS test
Follow these steps to configure a DNS test:
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view nqa entry admin-name operation-tag —
Configure the test type as DNS
and enter test type view
type dns Required
Specify a destination address for
a DNS test
destination ip ip-address
Required
By default, no destination IP
address is configured for a test
operation.
The destination IP address must
be the IP address of the DNS
server.
Configure the domain name resolve-target domain-name
Required
By default, no domain name is
configured for a DNS test.
Configure optional parameters
common to an NQA test group
See Configuring Optional Parameters
Common to an NQA Test Group
Optional
Because a DNS test is a process to simulate the domain name resolution, the mapping between the
domain name and the IP address is not saved.
Configuring an FTP Test
An FTP test is mainly used to test the connection between the NQA client and a specified FTP server
and the time necessary for the FTP client to transfer a file to or download a file from the FTP server.
Configuration prerequisites
Before an FTP test, perform some configurations on the FTP server. For example, configure the
username and password that are used to log in to the FTP server. For more information about FTP
server configuration, see FTP Configuration in the Fundamentals Configuration Guide.
Configuring an FTP test
Follow these steps to configure an FTP test: