H3C Technologies H3C S7500E Series Switches - Manual (Page 177)

10-8
# Configure VLAN 2 as the remote probe VLAN and GigabitEthernet 2/0/2 as the monitor port for the
remote destination mirroring group, and configure GigabitEthernet 2/0/2 as an access port and assign
it to VLAN 2.
[SwitchC] mirroring-group 1 remote-probe vlan 2
[SwitchC] mirroring-group 1 monitor-port GigabitEthernet 2/0/2
[SwitchC] interface GigabitEthernet 2/0/2
[SwitchC-GigabitEthernet 2/0/2] port access vlan 2
After the configuration above, you can monitor packets from the 10.1.1.1/24 network segment on the
data monitoring device.