H3C Technologies H3C S7500E Series Switches - Manual (Page 42)

2-22
To do… Use the command… Remarks
Enter test type view of the test
group
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo }
The collaboration function is not
supported in UDP jitter and voice
tests.
Create a collaboration entry
reaction item-num
checked-element probe-fail
threshold-type consecutive
occurrences [ action-type { none |
trigger-only } ]
Required
Not created by default.
Exit to system view quit —
Create a track entry and associate
it with the specified collaboration
entry of the NQA test group
track entry-number nqa entry
admin-name operation-tag
reaction item-num
Required
Not created by default.
z You cannot modify the content of a reaction entry using the reaction command after the
collaboration entry is created.
z The collaboration function is not supported in a UDP jitter or voice test.
Configuring Trap Delivery
Traps can be sent to the network management server when test is completed, test fails or probe fails.
Configuration prerequisites
Before configuring trap delivery, you need to configure the destination address of the trap message
with the snmp-agent target-host command, create an NQA test group, and configure related
parameters. For the introduction to the snmp-agent target-host command, refer to SNMP
Configuration Commands in the Network Management and Monitoring Command Reference.
Configuring trap delivery
Follow these steps to configure trap delivery:
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view nqa entry admin-name operation-tag —
Enter test type view of the test
group
type { dhcp | dlsw | dns | ftp | http | icmp-echo |
snmp | tcp | udp-echo | udp-jitter | voice }
—