H3C Technologies H3C S7500E Series Switches - Manual (Page 134)

7-1
7
MIB Style Configuration
When configuring MIB style, go to these sections for information you are interested in:
z Setting the MIB Style
z Displaying and Maintaining MIB
H3C private MIB involves two styles, H3C compatible MIB and H3C new MIB. In the H3C
compatible MIB style, the device sysOID is under the H3C’s enterprise ID 25506, and the
private MIB is under the enterprise ID 2011. In the H3C new MIB style, both the device sysOID
and the private MIB are under the H3C’s enterprise ID 25506. These two styles of MIBs
implement the same management function except for their root nodes. A device is shipped with
MIB loaded and the MIB style may vary depending on the device model. To implement NMS’s
flexible management of the device, the device allows you to configure the MIB style, that is, you
can switch between the two styles of MIBs. However, you need to ensure that the MIB style of
the device is the same as that of the NMS.
Setting the MIB Style
Follow these steps to set the MIB style:
To do… Use the command… Remarks
Enter system view system-view —
Set the MIB style of the device mib-style [ new | compatible ]
Optional
new by default
The modified MIB style takes effect only after you reboot the device. Therefore, you are
recommended to reboot the device after setting the MIB style to ensure that modification of the
MIB style takes effect.
Displaying and Maintaining MIB
To do… Use the command… Remarks
Display the MIB style display mib-style Available in any view