H3C Technologies H3C S7500E Series Switches - Manual (Page 121)

6-3
figure, the managed object B can be uniquely identified by a string of numbers {1.2.1.1}. This
string is the OID of the managed object B.
Figure 6-2 MIB tree
A
2
6
1
5
2 1
1
2
1
B
SNMP Configuration
As configurations for SNMPv3 differ substantially from those for SNMPv1 and SNMPv2c, their
SNMP functionalities are introduced separately as follows.
Follow these steps to configure SNMPv3:
To do… Use the command… Remarks
Enter system view system-view —
Enable the SNMP agent snmp-agent
Optional
Disabled by default
You can enable the SNMP agent
through this command or any
command that begins with
snmp-agent.
Configure SNMP agent system
information
snmp-agent sys-info { contact
sys-contact | location
sys-location | version { all | { v1
| v2c | v3 }* } }
Optional
The defaults are as follows:
Hangzhou H3C Technologies
Co., Ltd. for contact; Hangzhou
China for location, and SNMP v3
for the version.
Configure a local engine ID for
an SNMP entity
snmp-agent local-engineid
engineid
Optional
Company ID and device ID by
default.
Create or update the MIB view
content for an SNMP agent
snmp-agent mib-view
{ excluded | included }
view-name oid-tree [ mask
mask-value ]
Optional
The MIB view name is
ViewDefault and OID is 1 by
default.