H3C Technologies H3C S7500E Series Switches - Manual (Page 194)

12-12
The trap buffer receives the trap information only, and discards the log and debugging
information even if you have configured to output them to the trap buffer.
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 12-2 for default
channel names.
Configure the channel through
which system information can
be output to the trap buffer and
specify the buffer size
info-center trapbuffer
[ channel { channel-number |
channel-name } | size
buffersize ] *
Optional
By default, system information is
output to the trap buffer through
channel 3 (known as trapbuffer)
and the default buffer size is
256.
Configure the output rules of the
system information
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug { level
severity | state state } * | log
{ level severity | state state } * |
trap { level severity | state
state } * ] *
Optional
Refer to Default Output Rules of
System Information .
Configure the format of the time
stamp
info-center timestamp
{ debugging | log | trap } { boot
| date | none }
Optional
The time stamp format for log,
trap and debugging information
is date by default.