Hypertherm HPR260 Manual Gas Preventive Maintenance Program Rev.5 - Manual (Page 83)

INSTALLATION
3-34 HPR260 Auto Gas Instruction Manual
Connect the torch to the quick-disconnect
Installation note
A lign the torch body to the torch leads and secure by
screwing completely together. Be certain that there is no
space between the torch body and the o-ring on the torch
leads. See also
Torch connections earlier in this section for
torch lead connections to ignition console.
Apply a thin film of silicone
lubricant to each o-ring
Torch body
220162
Torch quick-disconnect receptacle
220163
5