Hypertherm HPR260 Manual Gas Preventive Maintenance Program Rev.5 - Manual (Page 82)

INSTALLATION
HPR260 Auto Gas Instruction Manual 3-33
5
7. Connect the coolant return hose (red).
8. Connect the plasma gas hose.
9. Connect the shield gas hose.
10. Slide the torch sleeve over connections and screw it onto the torch body.
11. Slide the braided cover up to the torch sleeve. Make sure that the plasma, shield and vent hoses are routed through
the hole in the braided cover. Loosen the hose clamp on the braided cover, slide the braided cover and clamp over
the sleeve and tighten the clamp.