Hypertherm HPR260 Manual Gas Preventive Maintenance Program Rev.5 - Manual (Page 105)

OPERATION
HPR260 Auto Gas Instruction Manual 4-11
Install consumables
Do not overtighten parts! Only tighten until mating parts are seated.
Clean the current ring
using a cotton swab with
water or 3% hydrogen
peroxide.
Tool part number
104119
Apply a thin film of silicone lubricant on each o-ring.
5
Install the electrode Install the swirl ring Install the nozzle and
swirl ring
Install the inner
retaining cap Install the shield Install the
retaining cap