Hypertherm HPR260 Manual Gas Preventive Maintenance Program Rev.5 - Manual (Page 45)

SPECIFICATIONS
2-6 HPR260 Auto Gas Instruction Manual
Ignition console – 078172
• The ignition console may be mounted locally on the power supply (LHF) or remotely on the cutting table’s bridge
(RHF). See Installation section for details.
• Maximum cable length from the ignition console to the torch lifter station is 20 m (65 ft). Allow room to remove
the top for servicing.
• The ignition console may be mounted horizontally or vertically.
9.1 kg
20 lb
283 mm
11.125"
219 mm
8.625"
194 mm
7.625"
152 mm
6"
216 mm
8.5"