ETA Duplica Vital - Manual (Page 52)

The program 1–VITAL allows setting of browning colour in five levels (LL=VERY LIGHT,
L+M+D=see above, DD=VERY DARK).
VELIKOST (SIZE) button
This button is used for setting required bread weight for individual programs, i.e. 1000
g, 1200 g, 1400 g (see the recipes table). The text on the display shows selected
bread size. Does not apply to programs 1–VITAL, 7-DOTR (CAKE), 8-DŽEM (JAM),
9-TĚSTO (DOUGH), 11-PEČENÍ (BAKING), 12-DEZERT (DESSERT), 13–KVAŠENÍ
(FERMENTATION).
– 1000 g size (2.2 LB) = for small bread (use double pan with relevant kneading blades)
– 1200 g size (2.64 LB) = for medium-sized bread (use the big pan with small kneading
blades)
– 1400 g size (3.08 LB) = for large-sized bread (use the big pan with big kneading blades)
Note
- Bread weight 1000 g (2.2 LB) is regarded as total weight of all ingredients used for baking
of the bread (e.g. when a bread mix is used it is water, bread mix 500 g and yeast).
- When double pan is used for preparation of 2 x 500 g of bread the ingredients should
be equally divided into both baking chambers, i.e. each chamber will house 250 g of the
bread mix + corresponding volume of water and yeast.
- The content of the pan enables preparation of food (bread, cake, dough, meat loaf) up to
the maximum weight of 1.4 kg.
MENU button
The button is used for selection of the program required. Numbers of the display show the
program selected and its pre-set baking time. You can also use the BARVA (COLOUR)
button to define crust colour and the VELIKOST (SIZE) button to set the bread weight.
Modification of these parameters will automatically change baking times (more time or less
time required).
ČAS (TIME) button
- button is used for setting the time required for bread baking and preparation time and
other foods for program 1–VITAL.
- The button is used for setting of required temperature in program 13–KVAŠENÍ
(FERMENTATION).
- For remaining programs (except for 11–PEČENÍ (BAKING) and 13–KVAŠENÍ
(FERMENTATION) it is used for setting of delayed start. Maximum delayed start time is
13 hours. The setup time will be added to the preparation time, i.e. the display will show
time required for the program to run.
Example:
It is 20:30 and the bread has to be finished at 7:00 in the morning, i.e. in 10 hours and 30
minutes. Press and hold the ČAS (TIME) button until 10:30 is shown on the display (i.e.
time between now (20:30) and the bread finish time). Confirm setting with the START/
STOP button. The time can be set in 10-minute increments.
52
GB
/ 210