Dialogic IMG 1004 - Manual (Page 99)

91
IMG 1004 - Introduction
Overview of Installation and Setup - IMG 1004
Topic Location: IMG 1004-Installation and Setup Guide > IMG 1004-Introduction
This Installation and Setup Guide will discuss the procedures for unpacking your
Dialogic ® IMG 1004 Integrated Media Gateway and Dialogic ® GateControl Element
Management System Server from the box to the point at which you can begin to
configure the IMG 1004 using the ClientView GUI.
Assumptions
It is assumed that personnel performing these installation and setup procedures are
familiar with telecommunications equipment and have a working knowledge of Linux.
Task Summary
1. Install Hardware
2. Install Software (if required)
3. Setup the GateControl EMS server
4. Start ClientView