Dialogic IMG 1004 - Manual (Page 17)

9
IMG 1010 - Hardware Installation
Hardware Installation Task Summary - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-Hardware
Installation
Click on links below to perform each of the following steps.
1. Prepare the site that IMG 1010 will be installed.
Prepare Site
2. Unpack IMG 1010 from shipping box.
Unpack the IMG
3. Mount the IMG 1010 in one of the two scenarios listed below.
Rack Mounting the IMG
Surface Mounting the IMG
4. Connect Power
Connecting AC Power
Connecting DC Power (IMG 1010 Only)
5. Connect IMG 1010 to Networks
Connect Ethernet and TDM Cables
6. Loop Timing can be configured on specific ports. See diagram on where loop
timing can be configured.
Connect Timing (IMG 1010 Only)
7. The IMG 1010 has an active and standby port for each of the Ports below.
Click on each link to see diagram displaying how redundancy needs to be
setup.
Redundant Control (IMG 1010)
Redundant Data (IMG 1010)
Redundant Signaling (IMG 1010
Related Topics:
RJ 48 Connector Pinouts (in the On-line Help)
Next Task:
Software Installation