Dialogic IMG 1004 - Manual (Page 159)

151
Downloading System Software Using Boot File on an SD
Card - IMG 1004
Topic Location: IMG 1004-Installation and Setup Guide > IMG 1004-SD Card
A BootP server is used to configure the following:
 IMG CTRL IP address
 subnet mask
 gateway address
 FTP server address
 FTP file name of the IMG system software
If a BootP server is not available but a remote FTP Server is available, the SD card
can be used to configure the boot parameters so the IMG 1004 can retrieve the
system software from the remote FTP Server. See Diagram Below.