Dialogic IMG 1004 - Manual (Page 162)

Installation and Setup
154
Downloading System Software From an SD Card - IMG 1004
Topic Location: IMG 1004-Installation and Setup Guide > IMG 1004-SD Card
If the IMG 1004 does not have access to an FTP server, then the IMG 1004 System
Software and IP information can be loaded through the use of an SD Card. The SD
Card is a small memory card much like the memory cards used in digital cameras
and other devices. The IMG 1004 has an SD card slot positioned on the right hand
side of the front panel just below the USB port. The SD card holds the bootup.cfg file
and the IMG 1004 System Software file. The procedure below will explain how to
load the IMG 1004 System Software and IP addresses using just the SD Card.
Steps
1. Insert the SD Card into an SD Writer.
2. Load the System Software File onto the SD Card or use IMG 1004 - SD Card
Remote Provisioning Feature..
3. On the SD Card provided with the IMG 1004 is a file named bootup.cfg.