Dialogic IMG 1004 User Manual

Page 75

IMG 1010 - Software Installation and Setup

Verify that runlevels 3 4 and 5 are all on by entering the following

command

$/sbin/chkconfig vncserver --list

vncserver 0:off 1:off 2:on 3:on 4:on 5:on 6:off

vi.

vncserver will now start on a reboot of GCEMS

Miscellaneous Information

Shared Connection

With RealVNC, two people can connect to the same GCEMS and both can have

monitor/configure access. This gives the support personnel the ability to configure a

system while the customer watches on their PC. To be able to accomplish this both

users must enable this option on the VNC Viewer application. To allow another

person to connect and view the same Xwindow, you must enable the Shared

Connection option. See Below.

Open VNC Viewer application

Select the Options button

Select the Misc tab.

Enable the Shared Connection (do not disconnect other viewers) option.

Save the new configuration so when the VNC Viewer is opened it will always

opewith the Shared connection enabled

Configuring Display:

Starting the VNC Server without the geometry setting will default the window size to

1024x768. Use the goemetry command (-geometry) to set the size of the VNC

window. The setting will need to be the same size or smaller than the resolution of

the Windows

-based PC on which are running the client. Below are some example

settings.

######################################
# Geometry settings
# Windows

: 1024x768 Linux: 1000x710

# Windows

: 1280x1024 Linux: 1260x960

######################################

Example:

vncserver

–

geometry 1260x960 :1