Dialogic IMG 1004 - Manual (Page 87)

79
IMG 1010 - SD Card
Downloading System Software Using Boot File on an SD
Card - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-SD Card
A BootP server is used to configure the following:
 IMG CTRL IP address
 subnet mask
 gateway address
 FTP server address
 FTP file name of the IMG system software
If a BootP server is not available but a remote FTP Server is available, the SD card
can be used to configure the boot parameters so the IMG can retrieve the system
software from the remote FTP Server. See Diagram Below.