Dialogic IMG 1004 - Manual (Page 95)

IMG 1010 - SD Card
87
SD Card Remote Provisioning - IMG 1010
Topic Location: IMG 1010-Installation and Setup Guide > IMG 1010-SD Card
Overview
This feature provides a means for installing new versions of system software to IMG
1010 located at remote sites with no BOOTP server, by allowing remote access to the
SD card on the IMG 1010. The SD Card is a small memory card much like the
memory cards used in digital cameras and other devices. The IMG 1010 has an SD
card slot positioned on the right hand side of the front panel just below the USB port.
Prior to software version 10.3.x the only way to access and edit information on the
SD Card would have been to physically go to the remote IMG 1010, pull the card out,
insert it into an SD Reader, and edit the information on the SD Card. A new feature
which has been implemented in software build 10.5.0 provisions the IMG 1010 as an
FTP server instead of just an FTP client. This will give the user the ability to transfer
files to and from the SD Card using the FTP utility. The FTP server functionality is
disabled by default and would need to be enabled through ClientView in order for the
remote provisioning to work.
Related Topics:
IMG 1010 - Downloading System Software Using a Boot File on an SD Card
IMG 1010 - Downloading System Software from an SD Card
IMG 1010 - Distributing System Software Using an SD Card
IMG 1010 - Default bootup.cfg File
Configuring Remote provisioning on SD card
NOTE: To use the IMG 1010 as an FTP server the SD Card must be inserted
into the SD Card socket. The IMG 1010 will have system software
running on it which was originally loaded through use of the SD
Card
1. Within ClientView, under the IMG Physical node, right click and select New FTP
Server. Commit This. Below is a screen capture of the FTP Server Pane
2. In order to enable the IMG as an FTP server, select enable in the drop down
menu in the "FTP Server" field.