Comtech EF Data CSAT-5060 - Manual (Page 220)

CSAT-5060 C-Band Transceivers Revision 1
Appendix A MN/CSAT5060.IOM
A–24
CSAT with Ethernet Remote Commands
Parameter
Type
Command Arguments Description of arguments Response to Command Query
Response to
query
Retrieve Firmware
Number for the
Ethernet board
N/A
variable length Query only
Returns the firmware type loaded into the unit.
Example:
>0001/FRM=
Boot:
FW-0000082;0.0.1a;04/09/08
Bulk1:
FW-0020597-;1.1.1 ;05/02/12
Bulk2:
FW-0020597-;1.1.1 ;05/02/12
N/A FRM? FRM=x
See Note 2
SNMP Read
Community
SRC= 20 bytes,
characters, no
spaces
Command or Query.
SNMP read community string. Empty string is not
allowed
Example: <1/SRC=public
SRC=
SRC?
SRC? SRC =x
See Note 2
SNMP
System Contact
SSC= 20 bytes,
characters
Command or Query.
SNMP System Contact string.
Example: <1/SSC=Joe Net Admin.
If not configured it returns empty string: <1/SSC=
SSC=
SSC?
SSC? SSC =x [1..20]
See Note 2
SNMP
System
Location
SSL= 20 bytes,
characters
Command or Query.
SNMP System Location string
Example: <1/SSL=Upstairs back right.
If not configured it returns empty string. <1/SSL= SSL=
SSL?
SSL? SSL =x [1..20]
See Note 2
SNMP
Unit Name
SSN= 20 bytes,
characters
Command or Query.
SNMP System Name string
Example: <1/SSN=Remote1.
If not configured it returns empty string. <1/SSC= SSN=
SSN?
SSN? SSN =x [1..20]
See Note 2
SNMP Trap
Destination IP
Address 1
STA= 15 bytes,
Numerical
Command or Query.
Used to set the IP address of the first SNMP Trap
destination IP Address 1 where traps will be sent where
the form xxx.xxx.xxx.xxx is the IP addresss
Example: <1/STA=010.006.030.001
When not configured, returns >0001/STA=0.0.0.0
STA =
STA?
STA? STA=xxx.xxx.xxx.x
xx
See Note 2