Comtech EF Data CSAT-5060 - Manual (Page 196)

CSAT-5060 C-Band Transceiver Revision 1
Updating Firmware MN/CSAT5060.IOM
3–4
• Via Telnet Remote Control – Type the “<1/FRW?” remote query (without quotes)
at the command prompt. The unit will return the Bulk, MnC, and FPGA firmware
load information.
4. Use Telnet Remote Control to select the boot image. To select the desired boot Image, type the
“<1/IMG=1” or “<1/IMG=2” remote command (without quotes) at the command prompt..
5. Reboot the CSAT.
A. Disconnect the power source from the CSAT.
B. Re-energize the CSAT. The unit will reboot using the updated firmware image.
6. To update the other firmware image, repeat steps 1 through 5.
The CSAT is now operating with its latest firmware. The Ethernet-based firmware update process is
now complete.